Vojnotehnicki glasnik / Military Technical Courier

261-271

Authors: Stanojević Petar, Mišković Vasilije

(not available in English) Kreirana metodologija može se koristiti u rešavanju problema projektovanja - reprojektovanja logističkih i sličnih OTS kod kojih je ubrzavanje informacionih i drugih tokova kljucni faktor uspeha [9]. Rezultati dobijeni korišćenjem ove metodologije pri rešavanju problema u praksi dali su zadovoljavajuće rezultate [17]. Ciljevi koji se mogu postići primenom ove metodologije su: povećanje efikasnosti i efektivnosti izvršenja usluge održavanja; veća raspoloživost proizvoda koji su potrebni korisniku; povećanje odgovornosti prema zahtevima korisnika; povećanje kvaliteta i pouzdanosti usluge (nije direktno već indirektno merljivo) i smanjenje troškova poslovanja. Celokupna metodologija zasnovana je na permanentnom traženju racionalnijih rešenja kojima se procesi pojednostavljuju i ubrzavaju. To preferira rešenja sa većom integracijom medu sličnim i zavisnim procesima, jer se kroz postupke kvantifikacije pokazalo da su takva rešenja principijelno uspešnija. Integracija informacionih tokova i delova sistema zahtevaće, verovatno, i promene u ponašanju zaposlenih i stvaranje partnerskih odnosa sa internim i eksternim okruženjem. Dobre rezultate može doneti podizanje mesta u hijerarhiji OTS namenjenog za šefa logističke funkcije (i SOd-a) i njegovo izjednačavanje po značaju sa funkcijama osnovnih delatnosti i razvoja, jer se time odnosi pretvaraju u partnerske, naglašava se značaj pravilne eksploatacije TS i korišćenja drugih materijalnih sredstava, a procesi, pogotovo razvojni ubrzavaju, jer se smanjuje obim potrebne koordinacije. Doseg primene ove metodologije na celinu SOd-a, logističkog ili sličnih OTS može se prikazati okvirom C na slici 2 (prikazana u I delu rada). Primenom ove metodologije ne mogu se reSiti svi problemi koje nameću starost organizacije ili vlasnički odnosi i odnosi moci u OTS. Takođe, ova metodologija se uz poteškoće može primeniti na projektovanje organizacija u kojima su osnovni procesi dugoročnog karaktera (npr. razvojno-istraživačke), jer se usredsređuje na osnovne materijalne i informacione tokove u sistemu od kojih zavisi efikasno i brzo pretvaranje inputa u output, kao i na uzimanje u obzir uticaja ostalih situacionih faktora.

283-294

Authors: Čabarkapa Obrad

The one-factor experiment design has been applied in the analysis of all input parameters occurring in the two phase flow process in automatic rifle barrels. The parameters predominantly influencing input characteristics have been chosen afterwards. A complete factor experiment plan is given for 24 chosen parameters, with the analysis of each particular parameter as well as of their effects on output characteristics. Parameter effects are ranked regression polynomials with regression coefficients are determined and average value deviation limits are given by dispersion and regression analyses. The complete analysis is carried out for the maximum pressure of powder gases and the muzzle velocity as two significant output characteristics of all arms. Based on calculation results, tabular and graphical 3D presentation of flow parameters is given as a function of projectile time and trajectory.

305-313

Authors: Pantić Mladen

The definition, classification and designation of elements of planetary gear trains were carried out and their basic characteristics were given in the paper the bases of kinematics of planetary gear trains were presented and possibilities of lock-up modes were analyzed from the special aspect of power circulation. The analysis of basic parameters of planetary gearboxes of some contemporary high speed tracked vehicles was performed and the kinematics schemes of gearboxes were shown. The basic elements of methodology for the creation of optimal kinematics scheme of compound planetary gear trains were described and the obtained optimal solution of the kinematic scheme was analyzed.

328-339

Authors: Lukić Tomislav

Conversion of laser radiation energy into radiated sample heat is the essence of laser application for metal processing. Energy and space-time characteristics of laser beam as well as material properties affect significantly processing results. Applying certain simplifications as well as classical methods, predominantly theories of thermal conductivity electrodynamics and fluid dynamics, there is a relatively easy way to acquire simple formulae for fast engineering calculations and estimations. On the basis of thus obtained conclusions, this paper points out some characteristics of laser radiation interaction with materials, typical for most common application areas such as heat treatment, cutting, drilling welding, marking, etc.

125-133

Authors: Nikolić Miladin, Smiljanić Čedo

The article presents basic characteristics of the Yugoslav Army logistic support with the special emphasis on the organization of fuel, oil and lubricant supply and fuel, oil and lubricant equipment maintenance. In accordance with the experiences of modern fighting forces, the article points out tendencies in the development of YA logistic support, especially in the system of supplying fuels, oils and lubricants and in their equipment maintenance. The role and the importance of information support are stressed in particular.

144-156

Authors: Stanojević Petar, Mišković Vasilije

The fundamental principles of the created methodology for designing organizational and technological (business) systems are given on the basis of results of well-known researches. The methodology is conceived in such a way to be applicable to the urde spectrum of possible organizational-technological systems, in particular to those systems where quickening of information and material flows represents the increase of successfulness. The methodology concerns designed systems as a whole with the special emphasis on the specific methodologies of design of technological and organizational sybsystem. Particular procedures for permanent estimations of variety solutions and for assuring design quality are included in the methodology as well. The application of the methodology in practice, in redesigning a specific maintenance system, has given appropriate results.

167-179

Authors: Simić Dragan

New aircraft generations face increasingly complex requirements aiming at significant improvement of performances, availability and suitability for maintenance of aviation electronics (avionics). Requested improvements were possible to be realized only by abandoning the sub-system-oriented architecture of integrated avionics and by accepting the function-oriented architecture. Significant improvement in hardware and software development as well as their standardization enabled switching to function-oriented architecture of integrated avionics, together with lower costs. This paper gives a modern approach to future avionics design from the standpoint of physical and functional architecture, information transmission architecture and control.

190-200

Authors: Knežević Dragan M.

Results of hundreds of experiments with valves of different resistance dimensions and constructions are in good accordance with theoretical results which shows that theoretical descriptions of valve closing procedures represent a reliable way which should be followed in this field. The theoretical pressure values in the front of a direct air-blast wave have been used to calculate the valve closing time. Since theoretically calculated closing times do not differ from those experimentally measured, it means that simulated parameters of air-blast waves, i.e. parameters of an ABW instrument, have been indirectly verified. The ABW simulation instrument has been described, its calculation has been given as well as the method for experimental determination of shut-off valves closing times.

209-223

Authors: Brčić Krsta

Universality, accessibility and low price of hardware and software are priorities which determine using PCs as much as possible. According to that there is a way to construct a training device with powerful configuration. This article systematizes procedures and data for designing a training device. The device can be used in offices, special rooms or platforms which simulate battle vehicles or battleships. The represented preliminary of constructing is based on realization possibilities, interest for this problem and personal computers availability.

5-10

Authors: Đedović Branko

Under the conditions of technological modernization and constant development of material means, the macrosystem of maintenance of technical material means in the Ground Forces becomes more and more complex. Complexity of technical support in general, and of maintenance as a particular task, have imposed the necessity to apply achievements of modern theoretical as well as practical aspects of logistic engineering and organization in the field of technical maintenance of technical material means in the state of peace as well as war. Flexibility, effectiveness and suitability of existing solutions have been analyzed. It was shown that it is possible to improve the existing solutions and to find new ones in maintenance and optimal use of material sources facilities and human resources. The verification of existing solution in practice has revealed new relations between phenomena and properties, as well as trends of their further development. The paper also points out the reasons for upgrading a uniform technology as a basis for the concept of maintenance of technical material means in the Ground Forces.

16-27

Authors: Kostadinović Dragan

The paper points out disadvantages and ambiguities of existing criteria for canon tubes condition determination as well as of for casting methods for their remaining service life. A possible approach in making decisions about corrective maintenance actions is given, particularly when concerning modern artillery weapons in which the application of criteria for determining tube service life in relation to material fatigue is of utmost importance.

41-47

Authors: Ivošević Milić

The theoretical analysis of tank motion under water during its overcoming of water obstacle, the action of resistance forces during that motion, the determination of the tractive effort and the tractive effort diagram of one modern battle tank are presented in the paper.

55-63

Authors: Veljanovski Borivoje V., Kalezić Miomir, Grabulov Vencislav, Nikačević Milutin

Owing to their strength-to-weight ratio, plasticity, fracture toughness and corrosion resistance, aluminium alloys are widely applied in military industry. New technologies and intensive activity in this field enabled replacement of steel parts by aluminium alloys in development and production of modern fighting vehicles, missiles and ammunition, fighter aircrafts chips of war, floating bridges, etc. The characteristics of basic aluminium alloys (types 2xxx, 5xxx, 6xxx and 7xxx) and types of semimanufactures products (plates, sheets, profiles, forgings, castings) are presented as well as technologies of their forming and trends in development of high-strength aluminium alloys.

71-83

Authors: Pokorni Slavko

(not available in English) Poslednjih decenija, po pravilu, oružane agresije započinju napadom sredstvima iz vazdušnog prostora, a agresor teži da vazduhoplovnim snagama reši svoje konačne ciljeve. Zbog toga protiv-vazdušna odbrana države koja je potencijalna žrtva agresije ima strategijski značaj u osujećivanju namera protivnika, bilo odvraćanjem od agresije ili odbranom. Protivvazdušna odbrana je veoma složena i zasniva se na različitim informacionim, vatrenim i sredstvima za elektronsko izviđanje i protivelektronska dejstva koja treba organizaciono i tehnički povezati u integralan (jedinstven) ekonomičan i efikasan sistem. Maksimalno is-korišćenje potencijalnih mogućnosti pojedinih oružanih sistema u sistemu PVO, pri dejstvu po različitim sredstvima pri njihovom masovnom napadu iz vazdušnog prostora, ili sasređivanju dejstva na određenim pravcima napada, može se postići samo uz maksimalnu koordinaciju dejstva pojedinih oružnih sistema po određenim ciljevima. Procesi koji se pri tome odvi-jaju u sistemu PVO odavno prevazilaze mogućnosti čoveka da ih rešava manuelno. Zbog toga se upravljanje tim procesima ostvaruje povezivanjem snaga i sred-stava PVO u jedinstvenu celinu sistemima automatizacije, odnosno komandno-informacionim sistemima. Komandno-informacioni sistemi PVO veoma su složeni, zasnivaju se na najsavremenijoj računarskoj i informacionoj tehnologiji i skupi su. Da bi se svi podsistemi PVO mogli uvezati u jednu celinu, moraju biti međusobno kompatibilni sa stanovišta povezivanja. Promašaji u opremanju sistema PVO mogu imati značajne posledice, kako u pogledu povećanih troškova, tako i u smanjenoj efikasnosti sistema PVO u odnosu na potencijalne mogućnosti podsistema. Zbog toga se projektovanju sistema PVO mora pri-stupiti sistemski, kao celini, da bi se svi predviđeni elementi sistema (vatreni sistemi, senzori odnosno radari i slično) mogli povezati i funkcionisati kao celina, a opremanje se može obavljati po delovi-ma. To znači da se izboru KIS PVO mora posvetiti pravovremena pažnja, kako sa stanovišta njegove konfiguracije, tako i sa stanovišta hardvera i softvera, posebno ako se u sistem PVO moraju integrisati oružni sistemi starije i novije generacije. Struktura KIS PVO zavisi od strukture podsistema u sistemu PVO. On se mora zasnivati na jedinstvenoj filozofiji, softveru i hardveru, kako bi opremanje sistema PVO oružnim sistemima bilo racionalno, a sistem PVO maksimalno efikasan. Upravo to su premise na kojima se zasnivaju ruski KIS PVO, koji u stvari predstavljaju računarske mreže. Svi tipovi ruskih oružnih sistema PVO međusobno su kompatibilni, pa se mogu povezati u automatizovani sistem kojim se upravlja iz jednog komandnog centra koji, takođe, može automatski koordinirati dejstvo oružnih sistema PVO protiv nezavisno otkrivenih ciljeva. Rusi su prvi u svetu uspostavili grupisanje PVO sistema po principu "otkrij-dejstvuj", u kojem se signal od radara automatski prenosi ne samo do zajedničkog operativnog centra, nego, pre svega, do oružnih sistema PVO. U ovakvom slučaju cilj se prati u realnom vremenu, što je od presudnog značaja u borbi sa ciljevima današnjih brzina. Rusi sada integrišu sve tipove oružnih sistema u jednu borbenu računarski upravljanu mrežu, koja će obuhvatiti protivavionske topove, raketne sisteme malog, srednjeg i velikog dometa, avijaciju u sistemu PVO, i sredstva za protivelektronsku borbu. U takvom sistemu PVO, odraze od ciljeva otkrivene jednim tipom oružnih sistema PVO primaju i ostali. Zahvaljujući takvoj organizaciji KIS PVO otkriveni ciljevi mogu se raspodeljivati između svih tipova oružnih sistema i vršiti njihovo uništenje, ako ne svih onda bar većine, čak i pri veoma masovnom raketnom vazdušnom napadu.