Radio physics and electronics

12-19

Authors: V.M. Gorobets’, V.B. Sinits’kiy, S.І. Khomenko

Subject and Purpose. The paper is devoted to the microwave propagation over the sea in the nearshore region. Emphasis is on microwave attenuation measurements in the semi-shade and deep-shade areas with a view to study conditions of the microwave propagation on a beyond-the-horizon path in the nearshore area using a radar method. Methods and Methodology. A radar technique, developed and tested, provides measuring a microwave attenuation coefficient along a 60 km long beyond-the-horizon path in the tropospheric surface layer. High-grade radar and Doppler radar beacons (racons) are employed. Of interest are experimentally obtained temporal dependences of signals from racons situated at different heights and, also, spatial field distribution curves from a steadily moving racon running a height 1 to 27 m for 25 minutes. Results. A prototype of high-grade X-band coherent continuous-wave (Doppler) radar has been designed and fabricated. A radar technique has been developed and tested for the analysis of microwave beyond-the-horizon propagation conditions in the shadow region, which involves continuous-wave (Doppler) radar and Doppler racons with a radar cross section (RCS) of about 60 m2. Conclusions. The technique proposed enables reliable tracking of racon responses up to a double radiohorizon range on over-sea paths. This technique can be used for radar calibrations when dealing with various location problems in the nearshore area, including detection and tracking small-size and low-flying targets and their radar identification.

28-34

Authors: S.Yu. Polevoy, G.O. Kharchenko, S.I. Tarapov, О.O. Kravchuk, K. Kurselis, R. Kiyan, B.N. Chichkov, N.I. Slipchenko

Subject and Purpose. The use of spatially structured ferromagnets is promising for designing materials with unique predetermined electromagnetic properties welcome to the development of magnetically controlled microwave and optical devices. The paper addresses the electromagnetic properties of structured ferrite samples of a different shape (spatial geometry) and is devoted to their research by the method of electron spin resonance (ESR). Methods and methodology. The research into magnetic properties of structured ferrite samples was performed by the ESR method. The measurements of transmission coefficient spectra were carried out inside a rectangular waveguide with an external magnetic field applied. Results. We have experimentally shown that over a range of external magnetic field strengths, the frequency of the ferromagnetic resonance (FMR) of grooved ferrite samples (groove type spatial geometry) increases with the groove depth. The FMR frequency depends also on the groove orientation relative to the long side of the sample. We have shown that as the external static magnetic field approaches the saturation field of the ferrite, the FMR frequency dependence on the external static magnetic field demonstrates "jump-like" behavior. And as the magnetic field exceeds the ferrite saturation field, the FMR frequency dependence on the groove depth gets a monotonic character and rises with the further growth of the field strength. Conclusion. We have shown that the use of structured ferrites as microwave electronics components becomes reasonable at magnetic field strengths exceeding the saturation field of the ferrite. At these fields, such a ferrite offers a monotonically increasing dependence of the resonant frequency on the external magnetic field and on the depth of grooves on the ferrite surface. Structured ferrites are promising in the microwave range as components of controlled filters, polarizers, anisotropic ferrite resonators since they can provide predetermined effective permeability and anisotropy

41-48

Authors: M.I. Dzyubenko, I.V. Kolenov, V.P. Pelipenko, N.F. Dakhov, A.V. Degtyarev

Subject and Purpose. The development and prototype making of a laser rangefinder operating in the 1.50…1.70 μm spectral region is reported. This wavelength region is attractive to both laser producers and laser users for, first of all, relative eye-safety of radiation. Methods and Methodology. The paraxial scheme of rangefinder construction is used, involving a software-controlled power supply of laser radiation with technical arrangements providing its adaptation to varying operating conditions. The alignment of the transceiver channels is provided with laser beam visualization methods. Results. A pulsed laser rangefinder operating at a 1.54 μm wavelength has been developed, a prototype has been made. The rangefinder essentially consists of the transmitting and receiving channels and the visual channel for targeting. The radiation source is a pulsed laser on ytterbium-erbium glass with semiconductor diode pumping and modulated Q-factor. The laser provides a 6 mJ power pulse of 25 ns duration and 5 mrad radiation divergence. A laser light spot of a required aperture is formed using a Galilean telescope system. For the photodetector of the reflected radiation, a pin-photodiode with a photosensitive area diagonal of 0.3 mm and a 2.5 ns time resolution is used. The echo signal processing module has been developed and performed, providing a high-precision registration of a time delay between the starting and reflected pulses. An effective method with the use of a charge-coupled device and an LCD monitor has been proposed and implemented for the alignment of all the three rangefinder channels. The rangefinder can operate in a single-pulse or repetitive-pulse mode with a probing pulse repetition rate of 1 Hz. Conclusion. A pulsed laser rangefinder operating in a relatively eye-safe spectrum region has been developed, a prototype has been made. The field tests have shown that the created rangefinder measures an object distance within 140…7 000 m with a measurement error no worse than 3 m.