Acta Innovations

5-13

Authors: Joanna Szmyt

The article presents examples of rehabilitation solutions in which textiles play an important role. They are a fully functional garment, an element of clothing adapted to a given part of the body or a product intended for use in improving health. They are designed with the use of modern production technologies that utilize various raw materials to support the health aspects of the user with their structure and properties.

24-30

Authors: Monika Janas, Alicja Zawadzka

Operation of biogas plants, anaerobic fermentation processes, collection and purification of biogas and its subsequent combustion may be a source of environmental hazard. The construction and operation of biogas plants is inextricably connected with the generation and emission of solid, liquid and gaseous pollutants into the environment. The aim of the work is to analyze environmental hazards resulting from the construction and operation of biogas plants. As part of the work, a comprehensive analysis of their impact on individual components of the environment was made. The effect of biogas plants on atmospheric air, soil and water environment and acoustic climate was analyzed and the potential range of these impacts was presented.

46-52

Authors: Anna Adamska, Zdzisław Pakowski

The drying process is one of the most important stages in the production of building materials. The choice of the drying method affects the chemical and physical properties of the final product. The aim of this research is to measure and analyze the dynamic changes of internal pressure in non-shrinking, porous material during convective drying. In this work the problem will be discussed with special attention to the behavior of rewetted plaster. A commercial gypsum of company PIOTROWICE II (Alpol brand), typically used in construction and decorative plastering was applied. Gypsum was mixed with water in recommended proportion of 0.6 water/gypsum and drying experiments were performed at 50°C. The changes in sample overall mass as well as pressure and material temperature on the midpoint of sample axis were monitored. On the basis of the obtained experimental data of axial pressure, it is possible to perform a more detailed analysis of mass and heat transfer mechanisms than based on the drying kinetics alone. The pressure trends in the sample allow one to determine the moment of transition from the first to the second drying period, without the need to determine the kinetics of drying. The element of novelty consists of using a direct internal pressure measurement to provide information on the variation of the actual drying rate and mass transfer mechanisms.

61-70

Authors: Ewa Szymanek

This paper is devoted to experimental and numerical studies of heat distribution in an external building bulkhead. It analyzes the variation of temperature across the width of the bulkheads including the impact of changing external conditions. Mathematical model used in the research is formulated based on a fractional differential equation, which was proven to be a useful tool for describing this type of process in previous paper. Numerical results are compared with experiment data for different bulkhead configurations