Environmental Health Engineering and Management Journal

183-189

Authors: Soheil Sobhanardakani* *, Raziyeh Zandipak, Lobat Taghavi

Background: The rapid increase in agricultural and industrial development has made heavy metal pollution a serious environmental problem and public health threat; therefore, removal of heavy metals from water is important. The current study prepared DNPH@SDS@Fe3O4 nanoparticles as a novel and effective adsorbent for removal of Hg(II) ions from an aqueous solution. Methods: A selective adsorbent for Hg(II) was synthesized by coating Fe3O4 nanoparticles with sodium dodecyl sulfate which was further functionalized with 2,4-dinitrophenylhydrazine (2,4-DNPH). The synthesized nanoparticles were characterized by Fourier transform infrared spectroscopy (FTIR), x-ray diffraction (XRD), scanning electron microscopy (SEM) and SEM–EDXSt. The effects of pH, dose of adsorbent and shaking time on adsorption capacity were investigated. The kinetics and equilibrium of adsorption of the metal ions were thoroughly studied. Results: SEM showed that the size of the nanoparticles was 20 to 35 nm. The maximum adsorption capacity for Hg(II) was 164.0 mg g-1 for an adsorbent dose of 0.04 g at pH 7.0, 25°C and the initial metal concentration was 25 mg L-1,which was greater than for most adsorbents previously examined for Hg(II) adsorption. Adsorption experimental data showed good correlation with the pseudo-second-order model and Langmuir isotherm model. Conclusion: The results indicated that the DNPH@SDS@Fe3O4 nanoparticles are an efficient adsorbent for removal of heavy metal from wastewater.

197-202

Authors: Mohammad Malakootian *, Majid Amiri Gharghani

Background: Bio-aerosols in the air of hospital wards have an important role in the development of infections. It is important to make quantitative and qualitative estimations of microorganisms in the air of these wards as an index for environmental hygiene applicable to different hospital wards. The aim of the study was to investigate degrees of diversity and density of bio-aerosols in the education hospitals of Kerman city. Methods: This study applied a descriptive-cross-sectional methodology in the second half of 2014 in the education hospitals of Kerman city, with bed capacity of over 300. As many as 200 samples were collected from the air in different wards of each hospital using the standard method of the National Occupational Health and Safety Institute. Following collection, samples were placed in an incubator for 48 hours and then bio-aerosol detections were made for and resulting data reported as colonies/m3. Results: Results indicated that maximum and minimum degrees of bacterial density were observed in operation rooms and in the intensive care unit (ICU) of Shafa hospital. Furthermore, comparison showed that the operating room at Afzalipour hospital had the lowest level of fungal contamination, while ICU at Bahonar hospital had the highest level of fungal contamination. The emitted fungi of Aspergillus and Penicillium along with the bacteria, staphylococci and Acinetobacter had greater frequencies. The means of bacterial density and fungal density were not equal across the studied hospitals and significant statistical, difference was observed between means of bacterial and fungal density (P ≤ 0.001). Conclusion: Amounts of bacterial and fungal density were greater than those proposed in the American Industrial Health State Conference in 73.3% of the wards in the educational hospitals of Kerman city sampled in this study. Therefore it is suggested that implementation of some, necessary measures for continuous monitoring, promotion of hygienic disinfection standards, and ventilation systems are taken more seriously by stipulating regulations to control this important issue in the country’s hospitals.

209-215

Authors: Mohsen pourkhosravani *

Background: Unsustainable development of human societies, especially in arid and semi-arid areas, is one of the most important environmental hazards that require preservation of groundwater resources, and permanent study of qualitative and quantitative changes through sampling. Accordingly, this research attempts to assess and analyze the spatial variation of quantitative and qualitative indicators of Orzooiyeh groundwater resources in the Kerman province by using the geographic information system (GIS). Methods: This study attempts to survey the spatial analysis of these indexes using GIS techniques besides the evaluation of the groundwater resources quality in the study area. For this purpose, data quality indicators and statistics such as electrical conductivity, pH, sulphate, residual total dissolved solids (TDS), sodium, calcium; magnesium and chlorine of 28 selected wells sampled by the Kerman regional water organization were used. Results: A comparison of the present research results with standard of Industrial Research of Iran and also the World Health Organization (WHO) shows that, among the measured indices, the electrical conductivity and TDS in the chosen samples are higher than the national standard of Iran and of the WHO but other indices are more favourable. Conclusion: Results showed that the electrical conductivity index of 64.3% of the samples have an optimal level, 71.4% have the limit of Iran national standard and only 3.6% of them have the WHO standard. The TDS index, too, did not reach national standards in any of the samples and in 82.1% of the samples this index was on the national standard limit. As per this index, only 32.1% of the samples were in the WHO standards.

225-230

Authors: Mohsen Dehghani *, Mohammad Hossein Alizadeh

Background: The refining process generates large volumes of wastewater containing a variety of chemical contaminants. The use of natural substitutes in treating wastewater which have fewer harmful effects is considered an effective step towards protecting the environment and sustaining the development of these industries. This study focused on the use of Moringa oleifera and alum at the Wastewater Unit at Bandar Abbas Refinery. Methods: This study was performed in 2014 in a laboratory using jar apparatus. These experiments were conducted in batch system and effective parameters including pH, coagulant dose and contact time were investigated on the wastewater obtained from Bandar Abbas Oil Refinery. Results: The jar test experiment showed that M. oleifera at 70 mg/L, optimum temperature, pH, and mixing speed could remove 38.60% of chemical oxygen demand (COD), 63.70% of turbidity, and 62.05% of total suspended solids (TSS). Also, alum at 40 mg/L removed COD, turbidity, and TSS by 51.72%, 92.16%, and 85.26% respectively from the refinery wastewater. Moreover, when M. oleifera and alum was used together with a 2:1 dosage ratio (alum at 80 mg/L and M. oleifera at 70 mg/L), they will remove COD, turbidity, and TSS by up to 50.41%, 86.14%, and 81.52% respectively. Conclusion: The use of M. oleifera as a natural coagulant is important in treating refinery wastewater not only from an environmental but also an economic point of view.