Scientific Journal of Silesian University of Technology. Series Transport

9

Authors: Krzysztof LABISZ

The recent trend of using aluminium alloys instead of steel has reached the transportation industry, where increasingly, more parts are made of aluminium. An example is the belt pulley, applied for combustion engines for energy transmission. This part should be strong, durable, and lightweight. Aluminium-silicon alloys are a good choice, moreover, even when the surface is anodised, also because of their moderate inertia control and excellent wear characteristic during mechanical operations. Since aluminium is lightweight yet mechanically durable and anodised, it is an ideal belt pulley to use, especially in high-temperature operations. However, the main question is what type of Al-Si alloy, casting method and anodisation method should be used in terms of energy adsorption, having long-term properties for a lifetime, has to be applied. For this reason, this paper presents the influence of the chemical composition, casting method and anodising parameters on the structure and thickness of the anodic layer produced on aluminium alloys, as well as on the albedo value as an ability to reflect or absorb light. The aluminium alloys, AlSi12Cu1 and AlSi9Cu3, were used as research materials, obtained using different casting methods. The goal of this work was to determine the optimal combination of the anodisation conditions and materials for maximising the reflectivity factor of the surface, as a very important factor, determining the energy amount absorbed by an anodised surface. For further improvement of these surface properties as well as for enhancement of the properties and strengthen the material produced with different aluminium alloys production methods, different alloying additives were added. In addition, the mechanical properties of the surface layer were measured, where a remarkable hardness increase was obtained, and the best combination in form of AlSi12Cu1 high pressure cast was found with the highest albedo factor among all tested surface variants.

10

Authors: Maciej IRLIK

Although the implementation of a new Automatic Train Protection (ATP) system increases the safety level, it also exerts some impact on the blocking time in block sections, and consequently, on the headway between trains. At the same time, ATP systems introduce a train positioning system based on odometry calculation and reporting back to the trackside system. This paper describes the concept of using virtual blocks based on train position reporting in the ATP system for purposes of non-occupancy determination. Virtual blocks can be used to reduce headways on railway lines without increasing the number of trackside signalling devices. Preliminary capacity assessment was performed to calculate the average headway depending on the signalling system with reference to a case study.

10

Authors: Bożena SZCZUCKA-LASOTA, Tomasz WĘGRZYN, Bogusław ŁAZARZ, Adam JUREK, Krzysztof I. WILCZYŃSKI

Various types of structures and materials play an important role in the creation modern means of transport, including various grades of steel with different mechanical properties. For the rolling stock, proper operation and meeting the operational conditions is very important. Welded structures play an important role in the construction of various means of transport. Correct welding of carriages is important both in production and when carrying out various types of repairs. Each repair a carriage depends on its advancement and condition and the time of its operation. Each inspection for a refurbished carriage is defined either by the service life or the big distance traveled by the carriage. Important factor that may lead to damage is the effect of the load transported in the carriage. Therefore, the causes of the wear of the rolling stock are investigated and measures are taken to prevent any damage. The appropriate technical condition of the carriage also ensures safety on railroads for users and owners of the rolling stock. In the case of welded structures in carriages, it is influenced by poorly materials choice, incorrectly selected production processes and wrong selection of parameters. The goal of this paper is the mechanical properties analyse of weld low alloy steel structure of carriages after MAG welding using the parameters of the process. Thick-walled steel structures are used to build carriages, which is often a serious welding problem. The main role of welding conditions is connected with filer materials, welding technology, state of stress and temperature. In this paper, the properties of low alloy steel S3555J+N structures after MAG welding are presented. Furthermore, metallographic structure, tensile strength, bending test and impact toughness welded joints were analysed regarding welding parameters. The amount of acicular ferrite in WMD oxygen after welding was tested. Gas mixtures of argon and carbon dioxide with various percentage was used for shielding gas.

11

Authors: Iwona KRZYŻEWSKA

The transport process consists of many stages, where many interferences and problems may occur. It is important to identify these problems and find solutions to them, for example, using innovative tools supporting transport process management. A properly organised transport process allows the entire supply chain to function properly. For a transport process to be effective, it must be appropriately coordinated from planning, organising, implementing and controlling. In each of these phases, different types of problems may be encountered; therefore, the persons responsible for the various phases must monitor them closely. By reacting quickly, they can resolve any interference, so that the whole supply chain runs without major problems. The organisation of transport processes consists of several phases, which are an integral part of the whole process. Properly trained staff, knowledge of the transport market and the needs of the customer are essential for a company to function properly. Thanks to these three components, a company can offer services at the highest level. This work aims to develop a scheme of the transport process on the international market and also identify problems occurring in the organisation of transport processes. Some solutions to existing problems are also proposed.

12

Authors: Mirosław CZECH

The issue of organising efficient transport within Europe is one of the areas of a common policy of the European Union, shaped for over 30 years. Poland has been participating in this creative process since May 1, 2004. The intensity of the development of transport and the economy of individual countries that do not only belong to the Community but also have a significant impact on changes in the European Union's transport policy aimed at improving the course of pan-European transport corridors. In parallel with the creation of an effective European transport network, the rapid economic development of the regions belonging to the Union, including Poland, is becoming increasingly important. This article aims to discuss the issue of the development of the trans-European transport corridors, which also passes through the territory of Poland. In addition, this paper aims to present changes in EU policy concerning the shaping of transport infrastructure in Europe, following which a single transport network is to be created soon, meeting the communication and economic needs of the countries belonging to the Community.

12

Authors: Tomasz MATYJA

During transport operations, even under normal operating conditions, the loading unit is subject to inertial forces, which may cause deformation of the unit, and in extreme cases, its disintegration. Stretch film wrapping is the most commonly used method of securing a load unit. This paper presents a new simplified simulation model of a class A load unit, with a layered structure, secured with stretch film. Between the layers of packaging, stick-slip friction was applied. A method of estimating the containment force was also proposed. This model can be used to pre-determine the number of film layers necessary to ensure load stability. Simulations can reduce the amount of film used and the number of stability tests performed experimentally.

13

Authors: Grzegorz MOTRYCZ, Karolina J. HELNARSKA, Piotr STRYJEK

Modern vehicles are equipped with many systems that monitor the security of driving. An example is the tyre pressure monitoring system that shows a fault if the tyre pressure is lowered. Low tyre pressure or no pressure at all (0 kPa) means that continuing driving may lead to a dangerous situation. Prolonged driving of the vehicle at 0 kPa in the tyre ends with tyre burst, rim damage, or even loss of stability. Therefore, on the automotive market, manufacturers offer Run Flat tyres adapted to emergency driving with a pressure of 0 kPa. This article presents the results of an experimental research in the field of vehicle dynamics, continuing driving a vehicle with a loss of tyre pressure. These tests were carried out not only to confirm the data provided by tyre manufacturers and to verify the vehicle's driveability but also to analyse the effectiveness of stopping vehicles equipped with this type of tyres using, for example, police studs, especially when vehicles are used for crimes or terrorist activities.

17

Authors: Saif Eddine CHETTAH, Nadra NAIT AMAR

Less than ten years ago, Algeria embarked on an energy transition with the objectives of sustainable development. Although it concerns all economic sectors, efforts made in the field of road transport, as the main polluter and energy consumer at the national level, are far from being sufficient despite its inclusion in policy statements. This sector is operational exclusively on fossil and exhaustible energies whereas its atmospheric pollutants and gaseous emissions are highly harmful to the environment, public health and the economy. Thus, this paper points out the emergency of an energy transition in the road transport sector to clean and renewable energy as a necessity rather than a choice. It highlights, first, the characteristics of the Algerian automobile fleet and its various impacts and damages on the environment, public health and the economy. Furthermore, it evaluates the various policy initiatives towards sustainable transport and their deficiencies. Hence, the right attitudes and regulatory instruments towards sustainable transport in Algeria are recommended.