Scientific Journal of Silesian University of Technology. Series Transport

8

Authors: Michal PUŠKÁR, Melichar KOPAS, Marieta ŠOLTÉSOVÁ, Matúš LAVČÁK

The innovative system, which was developed for analysis and correction of motor management, is determined for the solution of practical problems concerning the operation of the piston combustion engines. Programming of the ignition curves and fuel maps without relevant feedback, namely, without information obtained from the engine operation, increases the risk of detonation combustion, which can destroy the combustion engine. However, the main application area of this system is the development of an algorithm, which is specified for control of the combustion process based on the HCCI technology (Homogenous Charge Compression Ignition). Nowadays, the functional principle of the HCCI engine is one of the most effective possibilities on how to reach higher operational efficiency of the gasoline engine, that is, closer to the efficiency level of the diesel driving units.

9

Authors: Blerina BEQAJ, Entela ÇOBANI

Groundwater quality study was conducted in the Drini basin situated in the northern part of the Albanian territory. The objective of this study was to identify the quality of groundwater in four different well-defined monitoring sites. Groundwater is vital for the population and is considered to be subject to continuous exploitation with high growth intensity, and permanent risk of pollution from natural and human activities. Contamination of groundwater occurs when synthetic products such as gasoline, oil, road salts and chemicals get into the groundwater and return it unsafe and unfit for human use. Groundwater monitoring was carried out according to a network, which aimed to include mainly the most intensive areas of exploitation and distribution in the aquifer. Samples were collected in two different months of June and October in four monitoring drilling sites and were analysed for those key indicators defined by the rules and procedures for the drafting and implementation of the national programme of environmental monitoring in Albania. The study results reveal that geological formation, human activities as well as environmental conditions affect groundwater quality. Complete chemical analysis revealed that the groundwater in this area results in medium hardness, has good physico-chemical properties, local pollution is encountered, and there is no massive pollution of the basin. They are waters with low mineralisation. Further, they are neutral waters, which meet the allowed norm for drinking water. The pollution displayed is occasional, as the presence of NH4+ and NO2- are isolated cases, manifested mainly by the non-application of areas of strictness and sanitary protection around the drill and the small cover of the subaxillary layer. The analysis performed for microelements shows that the content of some heavy metals is below the maximum allowed amount; this demands serious future attention to the density of the network and the monitoring frequency in this basin. The risk of pollution in the Drini basin is high due to the small protective cover, especially in the source of Dobrac. Intensive exploitation can lead to the mixing of fresh water with water with high mineralisation. The concentration of Cu, Pb, Zn, Cr, Cd, Na+, K+ and Cl− in the water samples known as the major pollutants from the urban transport sector, has shown that the values are within the water quality standard. The low concentration of these pollutants was due to the distance of the drilling sites from the roads in these areas.

10

Authors: Andrzej KUBIK, Zbigniew STANIK, Damian HADRYŚ, Csaba CSISZÁR

This article presents an innovative method of diagnostics of rolling bearings used in the bearing nodes of motor vehicles, with the use of a prototype specialist stand. The tests were carried out based on a developed research plan, which included the impact of damage to the bearing and tyre of the vehicle, as well as the vehicle speed. Vibration accelerations were recorded in three measurement axes. Signal spectra were created based on the time courses of the vibration signals and were further analysed. The presented method is aimed at detecting excessive wear of rolling bearings in wheels from its early period.

10

Authors: Peter B. OLADEJI, Hafeez Idowu AGBABIAKA

This study examined the effectiveness of para-transit transport activities by identifying the socioeconomic characteristics of both the passengers and drivers of public transport and the factors confronting their operation. It utilised primary and secondary data. A purposive sampling technique was employed which entailed the identification of all the motor parks, the selection of buses, minibuses and cars at the motor parks, major bus stops and conducting a survey using a structured questionnaire cum interview. Questionnaires were administered to 354 respondents to obtain information about their socioeconomic, trip characteristics and the unconventional public transport operations, of which a total of 312 questionnaires were duly completed and returned. Data collected were analysed using simple descriptive techniques and correlation analysis. The results showed that the majority of the passengers (61.4%) were within the 21 – 30 years age bracket while 43.7% of the drivers were within the 31-40 years age bracket, the patrons and the operators of the public transport are predominantly low-income earners as large proportion of the passengers (42.1%) earned below ₦10,000 per month while 46.9% of the drivers earned between ₦10,001 and ₦20,000 per month. The results of the correlation analysis indicated both the drivers’ and passengers’ perspectives, factors such as public transport conditions, road quality and drainage system are highly correlated between their paired variables. Hence, effort should be made by the government and public transport operators to improve the transport infrastructural facilities in the study area.

10

Authors: Ondrej STOPKA, Maria STOPKOVA, Iwona RYBICKA, Patrik GROSS, Karel JEŘÁBEK

This research outlines a research study wherein an implementation of the activity-based costing (ABC) approach for cost management in a railway transport enterprise is addressed. ABC is an efficient technique for enhancing the quality of provided services and process complexity of certain railway companies, executing its activities at a regional or international scale. It is one of the new costing approaches that eliminate the inaccuracies and deficiencies of the traditional costing system. Compared to other costing techniques, considerable change lies especially in the way of assigning indirect cost units to activities based on actual causations, and subsequently, assigning activities to the very cost items by the intensity of their consumption. Furthermore, this approach allows decision-makers to identify specific cost item in terms of determining ways of how they can be managed. The main objective of this work is to elaborate a particular study with a draft application of the ABC method encompassing a description of procedure steps, along with relevant quantifications, as well as summarising the results obtained.

12

Authors: Anjali TARAR, Deotima MUKHERJEE, Kalaga Ramachandra RAO

The purpose of this study is to analyse the accuracy of the static schedule of bus transit network in Delhi using real-time data available from Delhi’s Open Transit Data (OTD) platform. To access and organise the data, an algorithm that can convert real-time data into a General Transit Feed Specification (GTFS) format, needs to be designed. Further, this study intends to develop a methodology, which can convert raw data of bus locations into link travel times, which consequently, helps in identifying problematic links. As researchers continue to make use of the data available via GTFS, they may well be aware of the fact that such data may differ systematically from actual transit operations. Continuous improvement of the accuracy of the GTFS static file would benefit its users.

13

Authors: Piotr SOCZÓWKA, Marcin Jacek KŁOS, Renata ŻOCHOWSKA, Aleksander SOBOTA

Sustainable mobility is a priority for transport systems in urban areas. Contemporary planning of transport systems assumes an increase in the role of public transport in everyday trips. To increase the share of trips using public transport, it is essential to improve the accessibility of public transport stops. The accessibility of such stops depends primarily on the distance between the trip origin and the stop. Many factors influence the distance that passengers are willing to travel. This paper discusses the relationship between the access time to the bus stop and travel time. To study such a relationship, various statistical methods may be applied. This paper presents the results of the analysis performed based on the data on trips made by inhabitants of Bielsko-Biała, gathered during the building of its transport model.

14

Authors: Kamil KRASUSKI, Mieczysław BAKUŁA

This article presents and describes the operational capabilities of an onboard GNSS receiver to determine the reliability of the in-flight navigation parameters. An analysis was made of the operation reliability of an autonomous single-frequency Thales Mobile Mapper receiver in air navigation as compared to the technical operation of a dual-frequency Topcon HiperPro receiver. To this end, this work contains a comparison of the aircraft flight navigation parameters based on readings obtained from the Thales Mobile Mapper and Topcon HiperPro receivers. In particular, the comparison concerned the reliability of coordinate determination and flight speed parameters of an aircraft. The research experiment was conducted using a Cessna 172 aircraft, a property of the Military University of Aviation in Dęblin, Poland. Technical operation of the GNSS satellite receivers was tested in the flights of the Cessna 172 aircraft around the EPDE military airport in Dęblin. Based on the results obtained from the tests, it was found that the operational reliability of the Thales Mobile Mapper in the operational phase of the in-flight test ranged from -3.8 to +6.9 m in the XYZ geocentric frame and from -2.2 to +8.1 m in the BLh ellipsoidal frame, respectively. On the other hand, the accuracy of the Cessna 172 aircraft positioning when using the Thales Mobile Mapper receiver was higher than 1.7 m in the XYZ geocentric frame and higher than 2 m in the BLh ellipsoidal frame, respectively. Furthermore, the reliability of the Cessna 172 flight speed determination was from -3.4 to +2.4 m/s.

18

Authors: Piotr GORZELANCZYK, Maja WOJTASIK

This article aims to examine the emission of pollutants utilising transport in different points of the city in question at two different intervals, then show whether the means of transport negatively affects the city through pollution. The study of air pollutant emissions from transport sources is a key aspect towards solving problems related to environmental pollution. A study on the measurements of selected PM10 and PM2.5 pollutants to be able to determine the quality of air from transport sources in Pila at different times of the year and with appropriate assumptions regarding the appropriate distance by the road is included in this article. This study analysed data on air pollutants and compared it with the results of the Chief Inspectorate for Environmental Protection. This made it possible to propose solutions for the development of the air condition in Pila.