Scientific Journal of Silesian University of Technology. Series Transport

7

Authors: Milan DRBAL

The rotary engine mainly developed for the automotive industry by the NSU corporation is currently used in unmanned aircraft, transportable generators and small watercraft. In the early stage of the engine development, the simulation of the performance characteristics is advisable. The 3D CFD engine simulation is highly expensive in terms of CPU time demand and requires a high level of optimisation to provide adequate data. This method can be used later in the development and fine engine tuning. For the design of the prototype 1D, simulation is being used as a tool to compare various designs of the engine. While the current commercially available software (GT-suite, Ricardo Wave, etc.) is being improved marginally, the functionality of the software is being tested on the piston reciprocating engines. This paper explores the possibility of the algorithms of such a software to be used on the rotary engine thermodynamic simulation and provides an approach to design a simulation model that can be solved by the software to predict the performance characteristics of the engine prototype.

8

Authors: Elżbieta MACIOSZEK

Transport of oversize cargo is a specific form of transport service. Specialised equipment is required for its implementation, while the number of people involved in the transport process itself is much higher than in the case of classic road transport form. This paper presents the problems related to permits and penalties that are used in the carriage of oversize cargo and the problems of transport safety in relation to the techniques of fixing oversize loads in road transport.

10

Authors: Jacek CABAN, Paweł DROŹDZIEL

The dynamic development of motoring observed in the last two decades contributes to many negative phenomena occurring in road transport. Distinguished among these negative phenomena are high share of car traffic, road accidents, emission of toxic exhaust fumes into the atmosphere, etc. For these reasons, many initiatives are taken in the field of road transport management and city logistics. Traffic problems are solved from many aspects, such as the development of transport infrastructure, changing of urban transport organisation, parking organisation in city centre and Park & Ride system, as well as the progress of alternative means of transport. The problem of traffic congestion in urban areas is still a current topic. This article presents the formation of congestion in urban areas in chosen big cities in Poland. The first part of the article deals with the theoretical issues of traffic flow and congestion formation in the city road networks. The second part of the article outlines the situation of transport congestion with these cities based on the worldwide TomTom Traffic Index within the period of 2008-2016. This study is a brief analysis of the trends relating to the transport congestion based on the TomTom Traffic Index in Polish cities, which will allow future researchers a wider study of this problem. The authors suggest some solutions to reduce the level of transport congestion and harmful emissions from means of transport.

10

Authors: Małgorzata KIRSCHENSTEIN, Kamil KRASUSKI, Artur GOŚ

This article presents the results of research concerning the determination of an error of the vertical position of an aircraft during a flight, taking into account, the flight altitude and the values of the ZTD tropospheric product. In particular, this work focuses on the impact of an error in designating the ZTD tropospheric product on the correct determination of a flight altitude. The authors of this work performed a scientific experiment for research data of two flights made by a Cessna 172 around the aerodrome in Dęblin. This article shows the findings of the tropospheric ZTD product specified for the single-frequency SPP positioning method and dual-frequency PPP positioning method. Based on the obtained results, it was discovered that the error of the ZTD tropospheric delay causes an altitude error from 0.08 m at the zenith angle equal to 80o even to 0.79 m at the zenith angle equal to 85o.

11

Authors: Jędrzej ŁUKASIEWICZ

The purpose of this work is to demonstrate the advantages and disadvantages of unmanned aerial vehicles as devices supporting the system of physical protection of critical infrastructure facilities using the example of a nuclear power plant. This paper contains information on the reasons for the construction of a nuclear power plant in the era of economic development of the Polish state. The legal requirements consisting of the analysis of the risk of terrorist threats for the facility was indicated. One of the sources of danger is unmanned aircraft or flying models increasingly used in the airspace. Furthermore, this paper presents legal rules and principles according to which missions of unmanned aerial vehicles or flying models are performed. The current regulations allow the use of unmanned aerial vehicles as devices supporting physical security systems at facilities. This study showed that although the use of unmanned aircraft for the purpose of increasing the security level of critical infrastructure facilities has some limitations, however, the possibilities arising from their usefulness are the decisive advantage of the need to implement drone technology in security.

12

Authors: Marcin RUTKOWSKI

The competitive advantage of the passenger air transport market is a significant part of airline operations. An important element, a condition that may determine the achievement of competitive advantage, is the issue of safety, which also applies to the operation of aircraft. An example of creating an effective competitive advantage may be the operation of a new aircraft by air carriers. This article presents the process of creating a competitive advantage on the example of the Airbus A350 XWB and the Boeing 787 Dreamliner aircraft considering the safety aspect, which in the case of new means of transport in civil aviation may primarily concern the seeming childhood diseases occurring in the initial use of new aircraft. This article, in the form of comparative analysis, indicates the key features that determine the attractiveness of the new aircraft as a product on the passenger air transport market. Secondary data on the characteristics of the Airbus A350 XWB aircraft were used and compared with the data of the Boeing 787 Dreamliner to illustrate the properties that may indicate the manufacturer's superiority. Furthermore, this article proposes a scheme of creating competitive advantage in passenger air transport, which can be a model for creating a competitive advantage in civil aviation. The close relationship between the economic and technological aspects in creating competitive advantage was buttressed as well. This article also analysed secondary data related to the number of ordered and used aircraft and aviation events registered on the website: https://aviation-safety.net [8], which could have an impact on the level of safety of flight operations. Brought to the fore were situations in which the seeming childhood diseases in aircraft operated by the American manufacturer, Boeing 787 Dreamliner, such as defects in engines, power elements and risks associated with the use of composite materials, which were first used on such a large scale in the construction of wide-body aircraft.

13

Authors: Valery KURGANOV, Mikhail GRYAZNOV, Kirill DAVYDOV, Liliya POLYAKOVA

This study is aimed at improving the methods of carriage of passengers by urban transport to improve its reliability and efficiency. It can be achieved by forming back-up bus routes within the existing regular route network for servicing mass passenger-flows. This study theoretically substantiates the impact of back-up bus routes in the current regular route network on the reliability and efficiency of the transport process. Mathematical models of reservation of regular route network and the assessment of the reliability of passenger transport using different reservation schemes are suggested. Methodological recommendations on the formation of passenger traffic on back-up bus routes and cost reduction on its maintenance, by managing the route speed depending on the loading of the city road network, have been developed. Technical and economic evaluation was conducted to the developed methodological toolkit.

18

Authors: Martin MANTIČ, Jozef KUĽKA, Melichar KOPAS, Eva FALTINOVÁ, Leopold HRABOVSKÝ

This paper describes a question of evaluation necessity of bridge cranes using the method of limit deformation state and oscillation damping. The solution was performed by means of theoretical analysis and an experimental verification at the selected bridge crane. The final result sounds that in the case of a correct strength computing of given bridge crane, it is not necessary to also check deformation and damping of oscillation as well.

23

Authors: Melika MEHRIAR, Houshmand MASOUMI, Katarzyna NOSAL-HOY

Urban sprawl is considered as a western urban development pattern, which is common in different cities around the world. Although, a large number of studies have focused on urban sprawl, modelling urban sprawl has been less emphasised, especially in various geographical contexts. This study aims to investigate urban sprawl and its determinants in a post-socialist country and model urban sprawl based on disaggregated data. In addition, the correlations of urban sprawl with travel patterns were examined, along with the socioeconomic characteristics of university students in Cracow, Poland by applying the Weighted Least Square (WLS) regression model. The WLS regression model was fitted based on the data from 1,288 online questionnaires targeting university students. Furthermore, urban sprawl around the home and the university for each student who indicated the nearest intersection to their home and university were separately estimated by employing the Shannon entropy. Based on the findings, urban sprawl around homes was correlated with 14 transport patterns and socioeconomic features such as gender, age, driving license, financial dependency status, gross monthly income, number of commute trips, mode of transportation for commuting, number of trips for shopping or entertainment, daily shopping area, mode choice for shopping and entertainment trips inside and outside the neighbourhoods, frequency of public transport use, the attractiveness of shops inside the neighbourhoods, and the length of time living in the current home. Additionally, urban sprawl around the university was significantly correlated with age, car ownership, number of commute trips, and a sense of belonging to neighbourhoods, entertainment place, and residential location choice. Finally, a positive correlation was reported between urban sprawl with higher income, elderly student, financial dependent students, and car dependency trips, while urban sprawl was negatively related to the use of public transit.