Engineering, Technology & Applied Science Research

596-599

Authors: K. Aditya, A. Newwel

Open loop VVVF control has the disadvantage of low output torque when working at low frequency and poor speed precision at different load conditions.Various performance-improving schemes have been proposed for the basic VVVF control by compensating slips occurring in the low frequency range and slips caused by changing loads. Numerous papers have been published on the close loop speed control of rotary induction motor. In this paper a close loop speed control with VVVF control and slip regulation has been implemented for LIM based conveyor belt test Rig which compensates the disadvantages of traditional Volts/Hz control. SIMULINK results are presented to validate the effectiveness of proposed scheme.

605-611

Authors: A. Lazizi, H. Trouzine, A. Asroun, F. Belabdelouhab

This paper studies the numerical simulations of retaining walls supporting tire reinforced sand subjected to El Centro earthquake excitation using finite element analysis. For this, four cases are studied: cantilever retaining wall supporting sand under static and dynamical excitation, and cantilever retaining wall supporting waste tire reinforced sand under static and dynamical excitation. Analytical external stability analyses of the selected retaining wall show that, for all four cases, the factors of safety for base sliding and overturning are less than default minimum values. Numerical analyses show that there are no large differences between the case of wall supporting waste tire reinforced sand and the case of wall supporting sand for static loading. Under seismic excitation, the higher value of Von Mises stress for the case of retaining wall supporting waste tire reinforced sand is 3.46 times lower compared to the case of retaining wall supporting sand. The variation of horizontal displacement (U1) and vertical displacement (U2) near the retaining wall, with depth, are also presented.

618-624

Authors: H. Sellaf, H. Trouzine, M. Hamhami, A. Asroun

An experimental work was undertaken to study the effect of rubber tires on the geotechnical properties of a dredged sediment, using a mixing ratio of large size. For comparison, two types of soil were studied (dredged sediment from Fergoug dam and Tizi Tuff from the north west of Algeria). Taking into account the high compressibility and the low water absorption of the rubber tires, grain size analysis, density, Atterberg limits analysis, chemical composition, direct shear tests, loading-unloading tests, modified Proctor and CBR tests are performed on the two soils and their mixtures with different scrap tire rubber (10, 20, 25 and 50%). The results show that liquid limits and plastic indexes decrease with the scrap tire rubber content and that the decrease is more significant for soil with high plasticity. Cohesion also decreases with scrap tire rubber content when the internal friction angle is vacillating. Compression and recompression indexes increase gradually with the scrap tire rubber content and the variation for compression index is more significant for the two soils. Compaction characteristics and CBR values decrease with scrap tire rubber content. The CBR values for W=3% are important compared to those with W=5% excepted for mixture with (75% tuff and 25% scrap tire rubber). The results show that the scrap tire rubber can be used as a reinforcement material for dredged soil, but with a content that should not highly affect the compressibility.