Engineering, Technology & Applied Science Research

429-432

Authors: D. Benarbia, M. Benguediab, S. Benguediab

In this article we present a numerical simulation that allows describing and studying the damage of concrete works subjected to various stress types. In this study, the propagation of cracks in the concrete is analyzed as of their appearance, which requires having a thorough knowledge of the mechanical behavior of the material. The mechanical approach which leads to better understanding of fracture phenomena and can give satisfactory results, is that of the elastic linear mechanics of failure. The interest in this study is focused in the development processes of the cracks from a phenomenological point of view. The analysis is carried out by using fracture criteria while being based on the determination of the critical stress intensity factors, for each case of the several elaborate tests of indirect tensile per bending and Brazilian Disc. The analysis is carried out in a two-dimensional medium by the finite element method by using the ABAQUS software. The results obtained are compared with experimental data obtained analytically from other authors.

440-445

Authors: E. S. Ahmed

A microstrip-fed new UWB monopole antenna with a band-notch characteristic mounted on the finite cylindrical surface is presented. The proposed antenna consists of a rectangular metal radiation patch fed by a 50 ohm microstrip line and a rectangular ground plane. To achieve ultra-wideband, three modifications are introduced. The first one is to blend the upper and lower corners of the radiating plates. The second one is to remove a circular section from the radiating metal. The third one is to blend the upper corners of the ground plane. The antenna is designed on a substrate with dielectric constant εr=3 and 1.6 mm height. The proposed antenna is conformed on finite cylindrical substrates of radiuses 4, 5 and 6 cm. The cylindrical structures were simulated through CST microwave studio finite element package. The simulation results, obtained via CST package on the return losses, VSWR and radiation pattern of the antenna are presented. For both planar and conformal antennas, results show that the impedance bandwidth of the designed antenna is from 2-18 GHz with a return loss less than -10 dB (VSWR<2) and a band rejection of 5-6 GHz for wireless LAN (WLAN), that includes the band 5.15-5.825 GHz limited by IEEE 802.11.a and HIPERLAN/2 with return loss greater than -10dB. The proposed simple shaped conformal antenna provides a good radiation pattern and gain between 3.84 and 5.96 dBi over the entire frequency band excluding the rejected band.

452-460

Authors: S. A. Reffas, M. Elmeguenni, M. Benguediab

The use of polymeric materials in engineering applications is growing more and more all over the world. This issue requests new methodologies of analysis in order to assess the material’s capability to withstand complex loads. The use of polyacetal in engineering applications has increased rapidly in the last decade. In order to evaluate the behavior, the damage and coalescence of this type of polymer, a numerical method based on damage which occurs following several stages (nucleation of cavities, their growth and coalescence in more advanced stages of deformation) is proposed in this work. A particular attention is given on the stress-strain and the volumetric strain evolution under different triaxiality and for three initial void shapes. Its application to polyacetal allows approving this approach for technical polymers. Finally, this method allow us to compare the obtained results of basic calculations at different triaxiality and to discuss their possible influence on the initial size and the geometrical shape of the porosity on the material failure.