Bulletin of Prydniprovs'ka State Academy of Civil Engeneering and Architecture

18-26

Authors: Barsuk R. V., postgraduate, Irodov V. F., Dr. Sc. (Tech.), Prof

Problems formulation. The article deals with choice functions building of preferred solutions by experimental information for tubular gas heater working on fuel granules - pellets.Further choice functions using for making technical solutions by tubular gas heaters construction and designing. Recently research analysis. There are works about choice functions construction by separate presents are examined. But full chose functions building by separate presents are not examined. Aims and tasks. There are setting aim to develop full choice functions mathematical model on separate presents by authors. The expert are connect to primary experimental data’s evaluation that estimates separate results by output functions (criteria). Its evaluations issue in experimental points paired comparison’s table form. Thus, there are necessary construct binary choice relations presents on experimental “points” set by expert that then using for full choice function’s constructing. Conclusions. There are choice function’s construction’s sequence are sets. There are posed point comparison results that characterized tubular gas heater’s condition with expert’s evaluation using. Also posed output functions comparisons by which can be characterized improving tubular gas heater’s performance or vice versa.

36-42

Authors: Menejljuk A. I., Dr. Sc. (Tech.), Prof., lobakova L. V., postgraduate

Raising of problem.Non-compliance requirements of today's industrial enterprises, which were built during the Soviet period, as well as significant technical progress, economic reform and transition to market principles of performance evaluation leading to necessity to change their target and functionality. The technical condition of many industrial buildings in Ukraine allows to exploit them for decades.Redesigning manufacturing enterprises allows not only to reduce the cost of construction, but also to obtain new facilities in the city. Despite the large number of industrial buildings that have lost their effectiveness and relevance, as well as a significant investor interest in these objects, the scope of redevelopment in the construction remains unexplored. Analysis researches on the topic. The problem of reconstruction of industrial buildings considered in Topchy D. [3], Travin V. [9], as well as in the work of other scientists. However, there are no rules in regulatory documents and system studies for improving the organization of the reconstruction of buildings at realigning. The purpose of this work is the development an algorithm of actions for selection of effective organizational decisions at the planning stage of a reprofiling project of industrial buildings. The proposed algorithm allows you to select an effective organizational and technological solution for the re-profiling of industrial buildings, taking into account features of the building, its location, its state of structures and existing restrictions. The most effective organizational solution allows realize the reprofiling project of an industrial building in the most possible short terms and with the lowest possible use of material resources, taking into account the available features and restrictions. Conclusion. Each object has a number of unique features that necessary for considering at choosing an effective reprofiling variant. The developed algorithm for selecting effective decisions of reprofiling buildings is recommended for use in accordance with for the purpose of logical and errors excluding the final result.

52-59

Authors: Petrenko A.O., Ph. D, Ass. Prof., Petrenko V.O., Ph. D, Ass. Prof., Tsukanov А.А., head of laboratory

Statement of the problem. Health and human performance largely determined by the conditions of climate and air quality in residential, administrative and residential and public buildings. At that, in turn, is influenced by the external environment and the climate, and the geometric dimensions of the room, and thermal performance building envelopes, and the location of the premises (Orientation), and many other factors. The result is the formation of complex systems, which control decision-making in conditions of multifactor [1]. In hygienic purposes it is necessary to strive to create the best indoor microclimate conditions, regardless of changes in the factors that affect the climate in residential, administrative and residential and public buildings. Develop systems to ensure the necessary microclimate parameters – it is a complex and important task, which will depend entirely comfortable and cozy environment for the person. The problem of the present time, there is a steady increase in the energy consumption of these systems, due to the rise in price of non-renewable energy sources, and our job is, to simulate the work of software systems necessary microclimate for the changes in the factors that affect it and to minimize the use of non-renewable energy sources. Analysis of recent research and publications. Domestic and foreign hygienists [2, 3, 4] to establish a connection between the climate in the room and in the workplace and the state of human health. Formation of the indoor climate of residential, administrative and residential and public buildings is influenced by many factors that have already noted earlier [5, 6]. Study of the processes of influence of various factors on human health is of great complexity. If we consider each process separately, and in this case they are not currently amenable to theoretical description clearer. To simulate the effect of these factors studies were conducted, which showed that, with sufficient accuracy manage experimentally investigate the electrical field in the liquid conducting medium as an analog of the thermal field [7, 8]. Isolation of previously solved problems. Known methods for modeling are approximate and have drawbacks that reduce the accuracy and limited scope. Therefore, one way to obtain effective thermal solutions is a simulation of thermal processes with further analysis of the results. It was suggested that the thermal field in the room to simulate electric field in the plating bath, and the analog heat flux between surfaces of any room space assumed current density between the surfaces of the model. The smaller the distance between the selected measurement points, the more accurate will be recreated actual picture patterns in the electric field and hence the thermal field in the room [7, 8]. But this method does not enable to take into account all the possible variations that affect the formation of indoor climate. Working with models that use an electric field to the heat radiation transfer simulations showed a significant labor input in the input model of the initial information and the removal of the simulation results. Objectives. Describe the behavior of the system (the influence of the microclimate of the environment and the geometric dimensions of the room, and thermal performance building envelopes, and the location of the premises (Orientation), and many other factors in the indoor climate of buildings), to build theories and hypotheses that could explain the behavior, which It will be observed to use the theory for predicting the future behavior of the system, that is, those factors that can be caused by a change in the system or change the way of its functioning. Conclusions. The proposed approach to addressing the issues raised will reveal the point of interaction between the different elements and factors that affect the indoor climate of buildings for different purposes. In the future, use the simulation method to study changes in microclimate in the buildings of different functions when you change the factors that affect it. This will create a system of automatic control of technological space heating and cooling processes, which will adapt to the changes in the factors that affect the indoor climate of buildings for different purposes.

66-72

Authors: Polischuk S. Z., Dr. Sc. (Tech.), Prof., Каspijcteva V. Yu., competitor

Raising of problem. The problem of quality of atmospheric air takes a special place among problems of protection of a surrounding environment. It is caused first of all by vital necessity of atmospheric air for all alive on the Earth, influence of a condition of an atmosphere on global climatic processes and biosphere as a whole due to huge mobility of air weights with which harmful impurity can be transferred. These questions for industrial regions where the level of anthropogenous influence has reached critical size are especially actual. The Dnepropetrovsk area concerns to such regions also. By development of scripts of development of such regions and their territorial components there is a necessity for definition of possible consequences of anthropogenous processes, which occur (or can occur) in atmospheric air. It demands strengthening прогнозных functions of ecological monitoring, in particular on atmospheric air, at planning and building of territories, at a choice of the optimum script of town-planning. Purpose. To improve a subsystem of an estimation and the forecast of a condition of atmospheric air on an example of system of ecological monitoring «Pridneprov'e» the Dnepropetrovsk area by means of introduction of a complex of the mathematical models focused on large industrial region which will allow at presence of criteria and parameters to receive as statistical (for the short-term forecast during steady atmospheric processes), and dynamic estimations of a condition of atmospheric air, the forecast of changes of parameters of atmospheric air and distribution of polluting substances, and also their influence on an environment and the person. Conclusion. The offered approach allows to consider complex parameters of steady development, territorial, branch, social, economic and ecological, time aspects, opportunities of atmospheric air as a polyresource, provides the forecast and an estimation of a condition of atmospheric air in system of regional ecological monitoring at a choice and realization of strategy of steady ecological and economic development of territory.