Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska

4-9

Authors: Mateusz Midura, Przemysław Wróblewski, Damian Wanta, Grzegorz Domański, Mateusz Stosio, Jacek Kryszyn, Waldemar T. Smolik

The article concerns the research on the properties of core-shell superparamagnetic nanoparticles in the context of their use in medicine for diagnostics and therapy. The article presents a system for impedance (AC) spectroscopy of nanoparticles with a new arrangement of receive coils. A significant modification was the position of the reference coil in relation to the receive coils as well as the method of winding and routing the wires on the carcass. The 3D printing technique was used in the production of the measuring coil system. The aim of the work was to experimentally verify the developed measurement system and analyze its properties. The system tests were carried out at low frequencies ranging from 2 to 50 kHz. Complex magnetic susceptibility was measured for superparamagnetic iron oxide nanoparticles in polymer shells in a physiological saline solution. The obtained results confirmed the relevance of the concept of the measurements. In summary, the observed properties of the realized system are discussed and further directions of its development are proposed.

15-19

Authors: Valerii Shvaiko, Olena Bandurka, Vadym Shpuryk, Yevhen V. Havrylko

The paper presents the methods for fire identification using low-resolution space images obtained from Terra Modis and NOAA satellites. There are lots of algorithms to identify potentially "fire pixels" (PF). They are based on the assessment of temperature in spectral ranges from 3.5–4 to 10.5–11.5 microns. One of the problematic aspects in the Fire Detection Method using low-resolution space images is "Cloud and Water Masking". To identify "fire pixels", it is important to exclude from the analysis fragments of images that are covered with clouds and occupied by water objects. Identification of pixels in which one or more fires are actively burning at the time of passing over the Earth is the basis of the algorithm for detecting potentially "fire pixels". The algorithm requires a significant increase in radiation in the range of 4 micrometers, as well as on the observed radiation in the range of 11 micrometers. The algorithm investigates each pixel in a scene that is assigned one of the following classes as a result: lack of data, cloud, water, potentially fire or uncertain. The pixels that lack actual data are immediately classified as "missing data (NULL)" and excluded from further consideration. Cloud and water pixels, defined by the cloud masking technique and water objects, belong to cloud and water classes, respectively. The fire detection algorithm investigates only those pixels of the Earth's surface that are classified as potentially fire or uncertain. The method was implemented using the Visual Programming Tool PowerBuilder in the data processing system of Erdas Imaging. As a result of the use of the identification method, fires in the Chornobyl exclusion zone, steppe fires and fires at gas wells were detected. Using the method of satellite fire identification is essential for the prompt detection of fires for remote forests or steppes that are poorly controlled by ground monitoring methods.

24-27

Authors: Denys Bakhtiiarov, Oleksandr Lavrynenko, Nataliia Lishchynovska, Ivan Basiuk, Tetiana Prykhodko

Methods for synthesis a structural diagram of the processes for detecting and locating technical information leakage channels are analysed. Software for defining a controlled room zone was also presented. A proprietary approach to search the electromagnetic environment under radio interference has been developed to detect devices for unauthorized control of acoustic information using microphones and transmission of this information using a radio channel.

32-35

Authors: Magdalena Michalska

Currently, a large number of trait selection methods are used. They are becoming more and more of interest among researchers. Some of the methods are of course used more frequently. The article describes the basics of selection-based algorithms. FS methods fall into three categories: filter wrappers, embedded methods. Particular attention was paid to finding examples of applications of the described methods in the diagnosis of skin melanoma.

40-43

Authors: Serhii Zabolotnii, Sergii Mogilei

The paper regards a common transport problem with a non-classic optimization criterion to minimize transportation risks. It demonstrates that the risk parameters of the function could be found through the factor analysis method. Besides, considering that the problem contains several points of sending and delivering loads, the method is dealt with as a matrix. The research also regards the algorithm of matrix factor analysis application for determining parameters of the objective function for the problem to be solved. The survey results in a new method to construct the objective function for the optimization problem with probability parameters. It generally assists in suggesting a formal solution to such problems, foremost due to particular software.

50-53

Authors: Julia Milova, Yuri Melnik

The principles of poly-parametric information coding have been considered. The methods for developing poly-parametric codes have been presented. It is shown that the protection of block codes from channel interference using check patterns can be developed by a mono- or poly-parametric method. A special type of block codes has been presented, the check patterns of which are formed on the basis of their neighbours, which are functionally related to the given code combination. Such codes have been called poly-parametric. Binary poly-parametric ring codes, the check patterns of which are designed to detect and correct channel errors, are developed using the properties of Galois fields and on the basis of the vector shift indicators of the codewords. To obtain digital poly-parametric block codes, the properties and features of the normalized natural sequence are used. It is shown that each codeword of a binary block code can be represented as a certain positive integer in the decimal number system, which is an element of the natural sequence. Its elements on an interval that equals the norm acquire a functional dependency.

58-61

Authors: Wojciech Wlodyka, Dariusz Bober

The main goal of the article is to share some experimental view onto VR training applications, that allows for adaptation of the directed training scenario to a user being trained. The resulted application allows to the three scenarios being selected in any combination of ones, as well as the tasks modification through the input files, before a test starts. The program was developed in the Unity engine, using the modern UnityXR framework providing extensive support for leading virtual reality hardware. The resulting solution presents the possibility of an efficient training in Virtual Reality while modifying the course of training without any needs to recompile the program, and also it shows some positive values of using VR technology as a didactic solution.